1• Which control would you use if you needed to make sure the values in two different controls matched?
CompareValidator is used to ensure that two fields are identical.
2• What is validationsummary server control?where it is used?.
The ValidationSummary control allows you to summarize the error messages from all validation controls on a Web page in a single location. The summary can be displayed as a list, a bulleted list, or a single paragraph, based on the value of the DisplayMode property. The error message displayed in the ValidationSummary control for each validation control on the page is specified by the ErrorMessage property of each validation control.
If the ErrorMessage property of the validation control is not set, no error message is displayed in the ValidationSummary control for that validation control. You can also specify a custom title in the heading section of the ValidationSummary control by setting the HeaderText property.
You can control whether the ValidationSummary control is displayed or hidden by setting the ShowSummary property. The summary can also be displayed in a message box by setting the ShowMessageBox property to true.
3 • What is the sequence of operation takes place when a page is loaded?
4• Difference between asp and asp.net?.
"ASP (Active Server Pages) and ASP.NET are both server side technologies for building web sites and web applications, ASP.NET is Managed compiled code - asp is interpreted. and ASP.net is fully Object oriented. ASP.NET has been entirely re-architected to provide a highly productive programming experience based on the .NET Framework, and a robust infrastructure for building reliable and scalable web
applications."
5 • Name the validation control available in asp.net?.
RequiredField, RangeValidator,RegularExpression,Custom validator,compare Validator
6• What are the various ways of securing a web site that could prevent from hacking etc .. ?
1) Authentication/Authorization
2) Encryption/Decryption
3) Maintaining web servers outside the corporate firewall. etc.,
7• What is the difference between in-proc and out-of-proc?
An inproc is one which runs in the same process area as that of the client giving tha advantage of speed but the disadvantage of stability becoz if it crashes it takes the client application also with it.Outproc is one which works outside the clients memory thus giving stability to the client, but we have to compromise a bit on speed.
8• When you’re running a component within ASP.NET, what process is it running within on Windows XP? Windows 2000? Windows 2003?
On Windows 2003 (IIS 6.0) running in native mode, the component is running within the w3wp.exe process associated with the application pool which has been configured for the web application containing the component.
On Windows 2003 in IIS 5.0 emulation mode, 2000, or XP, it's running within the IIS helper process whose name I do not remember, it being quite a while since I last used IIS 5.0.
9• What does aspnet_regiis -i do ?
Aspnet_regiis.exe is The ASP.NET IIS Registration tool allows an administrator or installation program to easily update the script maps for an ASP.NET application to point to the ASP.NET ISAPI version associated with the tool. The tool can also be used to display the status of all installed versions of ASP. NET, register the ASP.NET version coupled with the tool, create client-script directories, and perform other configuration operations.
When multiple versions of the .NET Framework are executing side-by-side on a single computer, the ASP.NET ISAPI version mapped to an ASP.NET application determines which version of the common language runtime is used for the application.
The tool can be launched with a set of optional parameters. Option "i" Installs the version of ASP.NET associated with Aspnet_regiis.exe and updates the script maps at the IIS metabase root and below. Note that only applications that are currently mapped to an earlier version of ASP.NET are affected.
10• What is a PostBack?
The process in which a Web page sends data back to the same page on the server.
11• What is ViewState? How is it encoded? Is it encrypted? Who uses ViewState?
ViewState is the mechanism ASP.NET uses to keep track of server control state values that don't otherwise post back as part of the HTTP form. ViewState Maintains the UI State of a Page
ViewState is base64-encoded.
It is not encrypted but it can be encrypted by setting EnableViewStatMAC="true" & setting the machineKey validation type to 3DES. If you want to NOT maintain the ViewState, include the directive < %@ Page EnableViewState="false" % > at the top of an .aspx page or add the attribute EnableViewState="false" to any control.
12• What is the <> element and what two ASP.NET technologies is it used for?
Configures keys to use for encryption and decryption of forms authentication cookie data and view state data, and for verification of out-of-process session state identification.There fore 2 ASP.Net technique in which it is used are Encryption/Decryption & Verification
13• What three Session State providers are available in ASP.NET 1.1? What are the pros and cons of each?
ASP.NET provides three distinct ways to store session data for your application: in-process session state, out-of-process session state as a Windows service, and out-of-process session state in a SQL Server database. Each has it advantages.
1.In-process session-state mode
Limitations:
* When using the in-process session-state mode, session-state data is lost if aspnet_wp.exe or the application domain restarts.
* If you enable Web garden mode in the <> element of the application's Web.config file, do not use in-process session-state mode. Otherwise, random data loss can occur.
Advantage:
* in-process session state is by far the fastest solution. If you are storing only small amounts of volatile data in session state, it is recommended that you use the in-process provider.
2. The State Server simply stores session state in memory when in out-of-proc mode. In this mode the worker process talks directly to the State Server
3. SQL mode, session states are stored in a SQL Server database and the worker process talks directly to SQL. The ASP.NET worker processes are then able to take advantage of this simple storage service by serializing and saving (using .NET serialization services) all objects within a client's Session collection at the end of each Web request
Both these out-of-process solutions are useful primarily if you scale your application across multiple processors or multiple computers, or where data cannot be lost if a server or process is restarted.
14 • What is the difference between HTTP-Post and HTTP-Get?
As their names imply, both HTTP GET and HTTP POST use HTTP as their underlying protocol. Both of these methods encode request parameters as name/value pairs in the HTTP request.
The GET method creates a query string and appends it to the script's URL on the server that handles the request.
The POST method creates a name/value pairs that are passed in the body of the HTTP request message.
15 • Name and describe some HTTP Status Codes and what they express to the requesting client.
When users try to access content on a server that is running Internet Information Services (IIS) through HTTP or File Transfer Protocol (FTP), IIS returns a numeric code that indicates the status of the request.
This status code is recorded in the IIS log, and it may also be displayed in the Web browser or FTP client. The status code can indicate whether a particular request is successful or unsuccessful and can also reveal the exact reason why a request is unsuccessful. There are 5 groups ranging from 1xx - 5xx of http status codes exists.
101 - Switching protocols.
200 - OK. The client request has succeeded
302 - Object moved.
400 - Bad request.
500.13 - Web server is too busy.
16 • Explain < @OutputCache% > and the usage of VaryByParam, VaryByHeader.
OutputCache is used to control the caching policies of an ASP.NET page or user control. To cache a page @OutputCache directive should be defined as follows < %@ OutputCache Duration="100" VaryByParam="none" % >
VaryByParam:
A semicolon-separated list of strings used to vary the output cache. By default, these strings correspond to a query string value sent with GET method attributes, or a parameter sent using the POST method. When this attribute is set to multiple parameters, the output cache contains a different version of the requested document for each specified parameter. Possible values include none, *, and any valid query string or POST parameter name.
VaryByHeader:
A semicolon-separated list of HTTP headers used to vary the output cache. When this attribute is set to multiple headers, the output cache contains a different version of the requested document for each specified header.
17 • What is the difference between repeater over datalist and datagrid?
The Repeater class is not derived from the WebControl class, like the DataGrid and DataList. Therefore, the Repeater lacks the stylistic properties common to both the DataGrid and DataList. What this boils down to is that if you want to format the data displayed in the Repeater, you must do so in the HTML markup.
The Repeater control provides the maximum amount of flexibility over the HTML produced. Whereas the DataGrid wraps the DataSource contents in an HTML <>, and the DataList wraps the contents in either an HTML <> or <> tags (depending on the DataList's RepeatLayout property), the Repeater adds absolutely no HTML content other than what you explicitly specify in the templates.
While using Repeater control, If we wanted to display the employee names in a bold font we'd have to alter the "ItemTemplate" to include an HTML bold tag, Whereas with the DataGrid or DataList, we could have made the text appear in a bold font by setting the control's ItemStyle-Font-Bold property to True.
The Repeater's lack of stylistic properties can drastically add to the development time metric. For example, imagine that you decide to use the Repeater to display data that needs to be bold, centered, and displayed in a particular font-face with a particular background color.
While all this can be specified using a few HTML tags, these tags will quickly clutter the Repeater's templates. Such clutter makes it much harder to change the look at a later date. Along with its increased development time, the Repeater also lacks any built-in functionality to assist in supporting paging, editing, or editing of data. Due to this lack of feature-support, the Repeater scores poorly on the usability scale.
However, The Repeater's performance is slightly better than that of the DataList's, and is more noticeably better than that of the DataGrid's. Following figure shows the number of requests per second the Repeater could handle versus the DataGrid and DataList.
RELATED POST
ASP.NET INTERVIEW QUESTIONS AND ANSWERS PART ONE
ASP.NET INTERVIEW QUESTIONS AND ANSWERS PART TWO
ASP.NET INTERVIEW QUESTIONS AND ANSWERS PART THREE
ASP.NET INTERVIEW QUESTIONS AND ANSWERS PART FOUR
ASP.NET INTERVIEW QUESTIONS AND ANSWERS PART FIVE
ADO.NET INTERVIEW QUESTIONS AND ANSWERS PART ONE
ADO.NET INTERVIEW QUESTIONS AND ANSWERS PART TWO
You can also learn the concept of frame work concept in detail with questions and answers in the following place.
MICROSOFT DOT NET FRAME WORK QUESTIONS AND ANSWERS PART ONE
MICROSOFT DOT NET FRAME WORK QUESTIONS AND ANSWERS PART TWO
MICROSOFT DOT NET FRAME WORK QUESTIONS AND ANSWERS PART THREE
MICROSOFT DOT NET FRAME WORK QUESTIONS AND ANSWERS PART FOUR
MICROSOFT DOT NET FRAME WORK QUESTIONS AND ANSWERS PART FIVE
MICROSOFT DOT NET FRAME WORK QUESTIONS AND ANSWERS PART SIX
MICROSOFT DOT NET FRAME WORK QUESTIONS AND ANSWERS PART SEVEN
MICROSOFT DOT NET FRAME WORK QUESTIONS AND ANSWERS PART EIGHT
MICROSOFT DOT NET FRAME WORK QUESTIONS AND ANSWERS PART NINE
MICROSOFT DOT NET FRAME WORK QUESTIONS AND ANSWERS PART TEN
CompareValidator is used to ensure that two fields are identical.
2• What is validationsummary server control?where it is used?.
The ValidationSummary control allows you to summarize the error messages from all validation controls on a Web page in a single location. The summary can be displayed as a list, a bulleted list, or a single paragraph, based on the value of the DisplayMode property. The error message displayed in the ValidationSummary control for each validation control on the page is specified by the ErrorMessage property of each validation control.
If the ErrorMessage property of the validation control is not set, no error message is displayed in the ValidationSummary control for that validation control. You can also specify a custom title in the heading section of the ValidationSummary control by setting the HeaderText property.
You can control whether the ValidationSummary control is displayed or hidden by setting the ShowSummary property. The summary can also be displayed in a message box by setting the ShowMessageBox property to true.
3 • What is the sequence of operation takes place when a page is loaded?
- BeginTranaction - only if the request is transacted
- Init - every time a page is processed
- LoadViewState - Only on postback
- ProcessPostData1 - Only on postback
- Load - every time
- ProcessData2 - Only on Postback
- RaiseChangedEvent - Only on Postback
- RaisePostBackEvent - Only on Postback
- PreRender - everytime
- BuildTraceTree - only if tracing is enabled
- SaveViewState - every time
- Render - Everytime
- End Transaction - only if the request is transacted
- Trace.EndRequest - only when tracing is enabled
- UnloadRecursive - Every request
4• Difference between asp and asp.net?.
"ASP (Active Server Pages) and ASP.NET are both server side technologies for building web sites and web applications, ASP.NET is Managed compiled code - asp is interpreted. and ASP.net is fully Object oriented. ASP.NET has been entirely re-architected to provide a highly productive programming experience based on the .NET Framework, and a robust infrastructure for building reliable and scalable web
applications."
5 • Name the validation control available in asp.net?.
RequiredField, RangeValidator,RegularExpression,Custom validator,compare Validator
6• What are the various ways of securing a web site that could prevent from hacking etc .. ?
1) Authentication/Authorization
2) Encryption/Decryption
3) Maintaining web servers outside the corporate firewall. etc.,
7• What is the difference between in-proc and out-of-proc?
An inproc is one which runs in the same process area as that of the client giving tha advantage of speed but the disadvantage of stability becoz if it crashes it takes the client application also with it.Outproc is one which works outside the clients memory thus giving stability to the client, but we have to compromise a bit on speed.
8• When you’re running a component within ASP.NET, what process is it running within on Windows XP? Windows 2000? Windows 2003?
On Windows 2003 (IIS 6.0) running in native mode, the component is running within the w3wp.exe process associated with the application pool which has been configured for the web application containing the component.
On Windows 2003 in IIS 5.0 emulation mode, 2000, or XP, it's running within the IIS helper process whose name I do not remember, it being quite a while since I last used IIS 5.0.
9• What does aspnet_regiis -i do ?
Aspnet_regiis.exe is The ASP.NET IIS Registration tool allows an administrator or installation program to easily update the script maps for an ASP.NET application to point to the ASP.NET ISAPI version associated with the tool. The tool can also be used to display the status of all installed versions of ASP. NET, register the ASP.NET version coupled with the tool, create client-script directories, and perform other configuration operations.
When multiple versions of the .NET Framework are executing side-by-side on a single computer, the ASP.NET ISAPI version mapped to an ASP.NET application determines which version of the common language runtime is used for the application.
The tool can be launched with a set of optional parameters. Option "i" Installs the version of ASP.NET associated with Aspnet_regiis.exe and updates the script maps at the IIS metabase root and below. Note that only applications that are currently mapped to an earlier version of ASP.NET are affected.
10• What is a PostBack?
The process in which a Web page sends data back to the same page on the server.
11• What is ViewState? How is it encoded? Is it encrypted? Who uses ViewState?
ViewState is the mechanism ASP.NET uses to keep track of server control state values that don't otherwise post back as part of the HTTP form. ViewState Maintains the UI State of a Page
ViewState is base64-encoded.
It is not encrypted but it can be encrypted by setting EnableViewStatMAC="true" & setting the machineKey validation type to 3DES. If you want to NOT maintain the ViewState, include the directive < %@ Page EnableViewState="false" % > at the top of an .aspx page or add the attribute EnableViewState="false" to any control.
12• What is the <> element and what two ASP.NET technologies is it used for?
Configures keys to use for encryption and decryption of forms authentication cookie data and view state data, and for verification of out-of-process session state identification.There fore 2 ASP.Net technique in which it is used are Encryption/Decryption & Verification
13• What three Session State providers are available in ASP.NET 1.1? What are the pros and cons of each?
ASP.NET provides three distinct ways to store session data for your application: in-process session state, out-of-process session state as a Windows service, and out-of-process session state in a SQL Server database. Each has it advantages.
1.In-process session-state mode
Limitations:
* When using the in-process session-state mode, session-state data is lost if aspnet_wp.exe or the application domain restarts.
* If you enable Web garden mode in the <> element of the application's Web.config file, do not use in-process session-state mode. Otherwise, random data loss can occur.
Advantage:
* in-process session state is by far the fastest solution. If you are storing only small amounts of volatile data in session state, it is recommended that you use the in-process provider.
2. The State Server simply stores session state in memory when in out-of-proc mode. In this mode the worker process talks directly to the State Server
3. SQL mode, session states are stored in a SQL Server database and the worker process talks directly to SQL. The ASP.NET worker processes are then able to take advantage of this simple storage service by serializing and saving (using .NET serialization services) all objects within a client's Session collection at the end of each Web request
Both these out-of-process solutions are useful primarily if you scale your application across multiple processors or multiple computers, or where data cannot be lost if a server or process is restarted.
14 • What is the difference between HTTP-Post and HTTP-Get?
As their names imply, both HTTP GET and HTTP POST use HTTP as their underlying protocol. Both of these methods encode request parameters as name/value pairs in the HTTP request.
The GET method creates a query string and appends it to the script's URL on the server that handles the request.
The POST method creates a name/value pairs that are passed in the body of the HTTP request message.
15 • Name and describe some HTTP Status Codes and what they express to the requesting client.
When users try to access content on a server that is running Internet Information Services (IIS) through HTTP or File Transfer Protocol (FTP), IIS returns a numeric code that indicates the status of the request.
This status code is recorded in the IIS log, and it may also be displayed in the Web browser or FTP client. The status code can indicate whether a particular request is successful or unsuccessful and can also reveal the exact reason why a request is unsuccessful. There are 5 groups ranging from 1xx - 5xx of http status codes exists.
101 - Switching protocols.
200 - OK. The client request has succeeded
302 - Object moved.
400 - Bad request.
500.13 - Web server is too busy.
16 • Explain < @OutputCache% > and the usage of VaryByParam, VaryByHeader.
OutputCache is used to control the caching policies of an ASP.NET page or user control. To cache a page @OutputCache directive should be defined as follows < %@ OutputCache Duration="100" VaryByParam="none" % >
VaryByParam:
A semicolon-separated list of strings used to vary the output cache. By default, these strings correspond to a query string value sent with GET method attributes, or a parameter sent using the POST method. When this attribute is set to multiple parameters, the output cache contains a different version of the requested document for each specified parameter. Possible values include none, *, and any valid query string or POST parameter name.
VaryByHeader:
A semicolon-separated list of HTTP headers used to vary the output cache. When this attribute is set to multiple headers, the output cache contains a different version of the requested document for each specified header.
17 • What is the difference between repeater over datalist and datagrid?
The Repeater class is not derived from the WebControl class, like the DataGrid and DataList. Therefore, the Repeater lacks the stylistic properties common to both the DataGrid and DataList. What this boils down to is that if you want to format the data displayed in the Repeater, you must do so in the HTML markup.
The Repeater control provides the maximum amount of flexibility over the HTML produced. Whereas the DataGrid wraps the DataSource contents in an HTML <>, and the DataList wraps the contents in either an HTML <> or <> tags (depending on the DataList's RepeatLayout property), the Repeater adds absolutely no HTML content other than what you explicitly specify in the templates.
While using Repeater control, If we wanted to display the employee names in a bold font we'd have to alter the "ItemTemplate" to include an HTML bold tag, Whereas with the DataGrid or DataList, we could have made the text appear in a bold font by setting the control's ItemStyle-Font-Bold property to True.
The Repeater's lack of stylistic properties can drastically add to the development time metric. For example, imagine that you decide to use the Repeater to display data that needs to be bold, centered, and displayed in a particular font-face with a particular background color.
While all this can be specified using a few HTML tags, these tags will quickly clutter the Repeater's templates. Such clutter makes it much harder to change the look at a later date. Along with its increased development time, the Repeater also lacks any built-in functionality to assist in supporting paging, editing, or editing of data. Due to this lack of feature-support, the Repeater scores poorly on the usability scale.
However, The Repeater's performance is slightly better than that of the DataList's, and is more noticeably better than that of the DataGrid's. Following figure shows the number of requests per second the Repeater could handle versus the DataGrid and DataList.
RELATED POST
ASP.NET INTERVIEW QUESTIONS AND ANSWERS PART ONE
ASP.NET INTERVIEW QUESTIONS AND ANSWERS PART TWO
ASP.NET INTERVIEW QUESTIONS AND ANSWERS PART THREE
ASP.NET INTERVIEW QUESTIONS AND ANSWERS PART FOUR
ASP.NET INTERVIEW QUESTIONS AND ANSWERS PART FIVE
ADO.NET INTERVIEW QUESTIONS AND ANSWERS PART ONE
ADO.NET INTERVIEW QUESTIONS AND ANSWERS PART TWO
You can also learn the concept of frame work concept in detail with questions and answers in the following place.
MICROSOFT DOT NET FRAME WORK QUESTIONS AND ANSWERS PART ONE
MICROSOFT DOT NET FRAME WORK QUESTIONS AND ANSWERS PART TWO
MICROSOFT DOT NET FRAME WORK QUESTIONS AND ANSWERS PART THREE
MICROSOFT DOT NET FRAME WORK QUESTIONS AND ANSWERS PART FOUR
MICROSOFT DOT NET FRAME WORK QUESTIONS AND ANSWERS PART FIVE
MICROSOFT DOT NET FRAME WORK QUESTIONS AND ANSWERS PART SIX
MICROSOFT DOT NET FRAME WORK QUESTIONS AND ANSWERS PART SEVEN
MICROSOFT DOT NET FRAME WORK QUESTIONS AND ANSWERS PART EIGHT
MICROSOFT DOT NET FRAME WORK QUESTIONS AND ANSWERS PART NINE
MICROSOFT DOT NET FRAME WORK QUESTIONS AND ANSWERS PART TEN
No comments:
Post a Comment